flange kankare dunƙule
flange kankare dunƙule
Kara karantawa:Katalogi Kankare sukurori
Bayanin samfur na kankara fasteners
1. Yin amfani da zaren yankan cikin bangon rami na kayan tushe, kammala ƙaddamarwa.
2. High surface taurin, kyau da eco-friendly
3. Babban aiki anchors wanda ya bi ka'idar JG160-2017 na "Mechanical Anchors for Concrete"
Concrete anga amfanin samfurin
1, An yi yankan edae da kayan ɗorewa don tabbatar da cewa zaren zai iya yanke shi cikin rami da kyau.
bangon kayan tushe.
2. An yi su an yi su ne da kayan da ba su da ƙarfi kuma ana iya sake amfani da su
3. Ana iya kammala shigarwa da matsawa a cikin tafiya ɗaya, yana adana lokacin gini
4. Ƙananan haɓaka haɓakawa, kunna shigarwa tare da ƙananan gefuna da spacinq.
5. Cikakken m, musamman dacewa don gyarawa na wucin gadi
Matsakaicin anka daidai gwargwado
1. Gyara shinge, bututu, da dai sauransu.
2. Gyaran wucin gadi yayin ginin gyaran gaggawa
3.Anchorage na waje bango rufi bangarori
Kankare dunƙules Hex Flange Head Installation sigogi
| Bayani dalla-dalla | Tsawon samfur | Diamita Diamita (mm) | Haɗa zurfin h (mm) | Zurfin binne hnom (mm) | Kauri Anchor thx (mm) | Anchor Aperture d (mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
galvanized hex head dunƙule aronji sigogi na fasaha
| Bayani dalla-dalla | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Zurfin binne hnom (mm) | 65 | 6585 | 85 100 | 100125 | |
| Min substrate kauri hmin (mm) | 120 | 120 160 | 130 160 | Farashin 160210 | |
| Tinst max (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| Siminti mara fashewa | Tashin hankali (KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Ƙarfin Shearing (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min tazarar Cmin (mm) | 65 | 80 | 100 | 115 | |
| Min tazarar Smin (mm) | 50 | 60 | 75 | 85 | |
| 0.3 mm fashe kankare | Tashin hankali (KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Ƙarfin Shearing (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min tazarar Cmin (mm) | 65 | 80 | 100 | 115 | |
| Min tazarar Smin (mm) | 50 | 60 | 75 | 85 | |
