Hex taub hau qhob ntswj
Hex taub hau qhob ntsia hlau thauj tog
Nyeem ntxiv:Phau ntawv catalog qhob ntsia hlau
Hex taub hau tenten qhob hlau installation tsis
| Cov Khoom Qhia Khoom Khoom | Khoom ntev | Laum taub ua (mm) | Looj tsis sib thooj H (hli) | Qhov tob ntawm faus Hnom (hli) | Anchor Thickness THX (MM) | Thauj Tog Rau Nkoj Aperture D (Mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
Pob zeb ua pob zeb galvanized technicals
| Cov Khoom Qhia Khoom Khoom | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Qhov tob ntawm faus Hnom (hli) | 65 | 65 85 | 85 100 | 100 125 | |
| Min Substrate Thickness Hmin Qab (Mm) | 120 | 120 160 | 130 | 160 210 | |
| Tinnst Max (NM) | 5Y20 | I≤40 | PCT5 | I≤TEREST80 | |
| Tsis-Nres Ua Vaj Tse | Nro (kn) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Shearing quab yuam (kn) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min Margin CMin (MM) | 65 | 80 | 100 | 115 | |
| Min spacing smin (hli) | 50 | 60 | 75 | 85 | |
| 0.3 hli tawg ua vaj tse | Nro (kn) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Shearing quab yuam (kn) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min Margin CMin (MM) | 65 | 80 | 100 | 115 | |
| Min spacing smin (hli) | 50 | 60 | 75 | 85 | |
Sau koj cov lus ntawm no thiab xa mus rau peb
