Isi SDS Hex Washer agba agba
| Atụmatụ | Nkọwa |
| Hex Drive | Maka mma mbanye n'okpuru elu echichi torque |
| Mechaa | arụmọrụ mgbochi corrosion PolysealTM/ zinc plated |
| EPDM/Rubber/PVC/Bodedihe nchacha | Gbaa mbọ hụ na akara dị mma na iguzogide ịka nká |
| Agbakọta agba | Agba isi dị ka onye ahịa chọrọ |
| Nha (inch) | Dia. x Ogologo (mm) | Ebe egwu egwu (mm) | Ike ịkụ ihe (mm) |
| #10-16 x 1/2" | 4,8 x13 | #2 | 1.0-2.0 |
| #10-16 x 5/8" | 4,8 x16 | #2 | 1.0-2.0 |
| #10-16 x 3/4" | 4,8 x19 | #2 | 1.0-2.0 |
| #10-16 x 1" | 4,8 x25 | #3 | 1.0-3.0 |
| #10-16 x 1-1/4" | 4,8 x32 | #3 | 1.0-3.0 |
| #10-16 x 1-1/2" | 4,8 x38 | #3 | 1.0-3.0 |
| #10-16 x 2" | 4,8 x50 | #3 | 1.0-3.0 |
| #12-14 x 3/4" | 5,5 x19 | #2 | 2.0-4.0 |
| #12-14 x 1" | 5,5 x25 | #3 | 2.0-4.0 |
| #12-14 x 1-1/4" | 5,5 x32 | #3 | 2.0-4.0 |
| #12-14 x 1-1/2" | 5,5 x38 | #2 | 1.0-2.0 |
| #12-14 x 2" | 5,5 x50 | #3 | 2.0-4.0 |
| #12-14 x 2-1/2" | 5,5 x 63 | #3 | 2.0-4.0 |
| #12-14 x 3" | 5,5 x75 | #3 | 2.0-4.0 |
| #14-14 x 3/4" | 6,3 x19 | #3 | 2.0-4.0 |
| #14-14 x 1" | 6,3 x 25 | #3 | 2.0-4.0 |
| #14-14 x 1-1/4" | 6,3 x32 | #3 | 2.0-4.0 |
| #14-14 x 1-1/2" | 6,3 x38 | #3 | 2.0-4.0 |
| #14-14 x 2" | 6,3 x50 | #3 | 2.0-4.0 |
| #14-14 x 2-1/2" | 6,3 x 63 | #3 | 2.0-4.0 |
| #14-14 x 3" | 6,3 x75 | #3 | 2.0-4.0 |
| #14-14 x 4" | 6.3 x 100 | #3 | 2.0-4.0 |
| #14-14 x 5" | 6,3 x 125 | #3 | 2.0-4.0 |
Mara:
Ngwaahịa anyị niile na-abịa n'ụdị dị iche iche, ụdị na enwere ike ịhazi ya ka ọ dabara na mkpa gị.
Maka nha egosighi n'elu, biko kpọtụrụ anyị maka ozi ndị ọzọ.
Makaìhè/ọkara ọrụ nzube
Idozi roof oche ka ígwè Framing
Idozi angwa ngwa na nchara nchara
Mpempe data teknụzụ
Dee ozi gị ebe a ziga anyị ya
