Screw beton kepala countersunk
Thunderbolt Countersunk Kepala
Waca liyane:Katalog Sekrup Beton
Deskripsi Produk Countersunk Masonry Screw
1. Nggunakake benang nglereni menyang tembok bolongan saka bahan dasar, ngrampungake anchoring.
2. kekerasan lumahing dhuwur, ayu lan ramah lingkungan
3. Jangkar kinerja dhuwur sing tundhuk karo standar JG160-2017 saka "Mechanical Anchors for Concrete"
Keuntungan produk Countersunk Head Masonry Screw Anchors
1, Edae nglereni digawe saka bahan dhuwur-strenath kanggo mesthekake yen thread bisa lancar Cut menyang bolongan
tembok saka bahan dhasar.
2. Jangkar digawe saka bahan tahan nyandhang lan bisa digunakake maneh
3. Instalasi lan tightening bisa rampung ing siji, nyimpen wektu construction
4. Kaku expansion cilik, mbisakake instalasi karo sudhut cilik lan spacinq.
5. Rampung dicopot, utamané cocok kanggo mbenakake sak wentoro
baut jangkar beton countersunkorane katrangan ditrapake
1. Ndandani pager, pipa lsp.
2. Fiksasi sementara sajrone konstruksi perbaikan darurat
3. Anchorage panel insulasi tembok njaba
Parameter Instalasi jangkar sekrup Countersunk
Spesifikasi produk | dawa produk | Diameter Bor (mm) | Ketebalan bor h (mm) | Kedalaman kuburan hnom (mm) | Ketebalan jangkar thx (mm) | Bukaan Jangkar d (mm) |
---|---|---|---|---|---|---|
M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
M10 | 70 | 10 | 80 | 65 | 5 | 14 |
M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
M14 | 110 | 14 | 120 | 100 | 10 | 18 |
M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
Screw Beton FIXDEX Countersunk Parameter teknis
Spesifikasi produk | M8 | M10 | M12 | M14 | |
---|---|---|---|---|---|
Kedalaman kuburan hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
Min ketebalan substrat hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
Tinst maks (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
Beton non retak | Tekanan (KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
Gaya geser (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
Margin minimal Cmin (mm) | 65 | 80 | 100 | 115 | |
Jarak min Smin (mm) | 50 | 60 | 75 | 85 | |
beton retak 0,3 mm | Tekanan (KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
Gaya geser (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
Margin minimal Cmin (mm) | 65 | 80 | 100 | 115 | |
Jarak min Smin (mm) | 50 | 60 | 75 | 85 |