sekrup beton stainless steel
sekrup beton stainless steel
Waca liyane:Katalog Sekrup Beton
jangkar sekrup beton stainless steelkatrangan produk
1. Nggunakake benang nglereni menyang tembok bolongan saka bahan dasar, ngrampungake anchoring.
2. kekerasan lumahing dhuwur, ayu lan ramah lingkungan
3. Jangkar kinerja dhuwur sing tundhuk karo standar JG160-2017 saka "Mechanical Anchors for Concrete"
baut sekrup beton stainless steelkaluwihan
1, Edae nglereni digawe saka bahan dhuwur-strenath kanggo mesthekake yen thread bisa lancar Cut menyang bolongan
tembok saka bahan dhasar.
2. Jangkar digawe saka bahan tahan nyandhang lan bisa digunakake maneh
3. Instalasi lan tightening bisa rampung ing siji, nyimpen wektu construction
4. Kaku expansion cilik, mbisakake instalasi karo sudhut cilik lan spacinq.
5. Rampung dicopot, utamané cocok kanggo mbenakake sak wentoro
316 stainless steel sekrup beton orane katrangan ditrapake
1. Ndandani pager, pipa lsp.
2. Fiksasi sementara sajrone konstruksi perbaikan darurat
3. Anchorage panel insulasi tembok njaba
Parameter instalasi jangkar beton stainless steel
Spesifikasi produk | dawa produk | Diameter Bor (mm) | Ketebalan bor h (mm) | Kedalaman kuburan hnom (mm) | Ketebalan jangkar thx (mm) | Bukaan Jangkar d (mm) |
---|---|---|---|---|---|---|
M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
M10 | 70 | 10 | 80 | 65 | 5 | 14 |
M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
M14 | 110 | 14 | 120 | 100 | 10 | 18 |
M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
sekrup tapcon stainless steel Parameter teknis
Spesifikasi produk | M8 | M10 | M12 | M14 | |
---|---|---|---|---|---|
Kedalaman kuburan hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
Min ketebalan substrat hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
Tinst maks (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
Beton non retak | Tekanan (KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
Gaya geser (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
Margin minimal Cmin (mm) | 65 | 80 | 100 | 115 | |
Jarak min Smin (mm) | 50 | 60 | 75 | 85 | |
beton retak 0,3 mm | Tekanan (KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
Gaya geser (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
Margin minimal Cmin (mm) | 65 | 80 | 100 | 115 | |
Jarak min Smin (mm) | 50 | 60 | 75 | 85 |