Miżbugħa Hex Washer Head SDS
Karatteristiċi | Dettalji |
Hex Drive | Għal drive pożittiv taħt torque ta 'installazzjoni għoli |
Temm | Prestazzjoni tal-korrużjoni Polyseal kontra l-korrużjoniTM/żingu indurati |
EPDM/Gomma/PVC/MagħqudWasher | Tiżgura siġill effettiv u reżistenza għat-tixjiħ |
Tqabbil tal-Kulur | Kap miżbugħa skond il-ħtieġa tal-klijent |
Daqs (pulzier) | Dia. x Tul (mm) | Drill Point (mm) | Kapaċità tat-tħaffir (mm) |
#10-16 x 1/2“ | 4.8 x 13 | #2 | 1.0 – 2.0 |
#10-16 x 5/8“ | 4.8 x 16 | #2 | 1.0 – 2.0 |
#10-16 x 3/4“ | 4.8 x 19 | #2 | 1.0 – 2.0 |
#10-16 x 1“ | 4.8 x 25 | #3 | 1.0 – 3.0 |
#10-16 x 1-1/4“ | 4.8 x 32 | #3 | 1.0 – 3.0 |
#10-16 x 1-1/2“ | 4.8 x 38 | #3 | 1.0 – 3.0 |
#10-16 x 2“ | 4.8 x 50 | #3 | 1.0 – 3.0 |
#12-14 x 3/4“ | 5.5 x 19 | #2 | 2.0 – 4.0 |
#12-14 x 1“ | 5.5 x 25 | #3 | 2.0 – 4.0 |
#12-14 x 1-1/4“ | 5.5 x 32 | #3 | 2.0 – 4.0 |
#12-14 x 1-1/2“ | 5.5 x 38 | #2 | 1.0 – 2.0 |
#12-14 x 2“ | 5.5 x 50 | #3 | 2.0 – 4.0 |
#12-14 x 2-1/2“ | 5.5 x 63 | #3 | 2.0 – 4.0 |
#12-14 x 3“ | 5.5 x 75 | #3 | 2.0 – 4.0 |
#14-14 x 3/4“ | 6.3 x 19 | #3 | 2.0 – 4.0 |
#14-14 x 1“ | 6.3 x 25 | #3 | 2.0 – 4.0 |
#14-14 x 1-1/4“ | 6.3 x 32 | #3 | 2.0 – 4.0 |
#14-14 x 1-1/2“ | 6.3 x 38 | #3 | 2.0 – 4.0 |
#14-14 x 2“ | 6.3 x 50 | #3 | 2.0 – 4.0 |
#14-14 x 2-1/2“ | 6.3 x 63 | #3 | 2.0 – 4.0 |
#14-14 x 3“ | 6.3 x 75 | #3 | 2.0 – 4.0 |
#14-14 x 4“ | 6.3 x 100 | #3 | 2.0 – 4.0 |
#14-14 x 5“ | 6.3 x 125 | #3 | 2.0 – 4.0 |
Nota:
Il-prodotti kollha tagħna jiġu f'diversi daqsijiet, stil u jistgħu jiġu personalizzati biex jaqblu mal-bżonnijiet tiegħek.
U għad-daqs mhux indikat hawn fuq, jekk jogħġbok ikkuntattjana għal aktar informazzjoni.
Għaldawl/għan ta' dazju medju
Iffissar roof gverta għall-qafas tal-azzar
Iffissar accessories għall-qafas tal-azzar
Skeda tad-dejta teknika
Ikteb il-messaġġ tiegħek hawn u ibgħatilna