M10×40, M12×50, M16×65 Drop in anchor stock

Drop in anchor Large stock, Fast delivery
1.M10×40 394000PCS
2.M12×50 76000PCS
3.M16×65 13000PCS

Drop in anchor is a type of bolt used to fasten furniture, decorative items, etc. Drop in anchor for concrete usually has a flat head and a threaded body. The installation method of internally forced drop in anchor bolts is quite special, and it is suitable for installation on gypsum board walls or hollow brick walls. The following are the steps to install the internal pressure drop in anchor bolts:
First, use an appropriately drop in anchor tools sized electric drill to drill holes in the wall, taking care to choose the right drill bit for the bolt size.
Insert the plugged drop in anchor bolt into the drilled hole, making sure the head of the bolt is flush with the wall.
Use a screwdriver or wrench to turn the bolt until it is fully seated in the wall.
Finally, secure furniture or decorative items to the studs with screws, as desired.
Drop in anchor m10 should be noted that the installation of internally forced drop in anchor bolts should be based on the specific material and load conditions to select the appropriate type threaded rods and quantity to ensure the firmness and stability of the installation. If you are not sure about the installation method or need more detailed instructions, please refer to the instructions on the product packaging or seek professional advice.