Wedge anchor tensile strength
The concrete wedge anchor tensile strength comparison table of expansion bolts can help us choose the right expansion bolts to ensure the safety and reliability of the connection. In actual use, we should choose the appropriate expansion bolt model according to the needs of the structure, and compare the standard value in the table with the measured value to ensure that the tensile strength of the expansion bolts meets the requirements.
What factors will affect the pulling force of the wedge bolt:
1. Pay attention to the installation direction of the expansion bolt and the size of the hole to ensure that the friction between the bolt and the hole wall is large enough.
2. Use appropriate tools and methods to tighten the expansion bolts to avoid excessive or insufficient tightening force.
3. Regularly check the tightening state and tensile performance of the expansion bolts, and replace damaged or aged expansion bolts in time.
When using trubolt wedge anchor, we should select, install and inspect them according to standard requirements to ensure the stability and safety of the structure.
grade 5.8 wedge anchor | ||||||
---|---|---|---|---|---|---|
size | standard depth | |||||
M6 | M8 | M10 | M12 | M16 | M20 | |
Tension(KN) | 4.0 | 9.0 | 11.3 | 16.7 | 24.7 | 39.7 |
Shearing Force(KN) | 3.8 | 5.8 | 8.9 | 12.3 | 21.8 | 37.8 |
size | shallow dept | |||||
M6 | M8 | M10 | M12 | M16 | M20 | |
Tension(KN) | 5.4 | 12.6 | 16.5 | 19.8 | 30.6 | 41.2 |
Shearing Force(KN) | 6.84 | 10.44 | 16.02 | 22.14 | 39.24 | 68.04 |
grade 8.8 wedge anchor | ||||||
---|---|---|---|---|---|---|
size | standard depth | |||||
M6 | M8 | M10 | M12 | M16 | M20 | |
Tension(KN) | 6.0 | 13.5 | 15.7 | 19.8 | 29.2 | 42.7 |
Shearing Force(KN) | 5.7 | 8.7 | 13.35 | 18.45 | 32.7 | 56.7 |
size | shallow dept | |||||
M6 | M8 | M10 | M12 | M16 | M20 | |
Tension(KN) | 4.6 | 10.5 | 12.7 | 16.5 | 22.9 | 32.5 |
Shearing Force(KN) | 5.7 | 8.7 | 13.35 | 18.45 | 32.7 | 56.7 |
wedge anchor | ||||||
---|---|---|---|---|---|---|
size | standard depth | |||||
M6 | M8 | M10 | M12 | M16 | M20 | |
Tension(KN) | 7.2 | 16.2 | 19.8 | 22.3 | 32.4 | 44.5 |
Shearing Force(KN) | 6.85 | 10.44 | 16.02 | 22.14 | 39.24 | 68.04 |
size | shallow dept | |||||
M6 | M8 | M10 | M12 | M16 | M20 | |
Tension(KN) | 5.4 | 12.6 | 16.5 | 19.8 | 30.6 | 41.2 |
Shearing Force(KN) | 6.84 | 10.44 | 16.02 | 22.14 | 39.24 | 68.04 |
Post time: Jun-18-2024