Countersunk musoro concrete screw
Kutinhira kwenyika
Verenga zvimwe:Catalog concrete screws
Countersunk masonry screw chigadzirwa tsananguro
1. Uchishandisa tambo dzinocheka mumadziro egomba rezvinyorwa zvebhokisi, zadzisa iyo inosimbisa.
2. Kureba kwepamusoro kuomarara, wakanaka uye eco-hushamwari
3. Yakakwirira-perform masokisi iyo inotevedzera iyo JG160-2017 chiyero che "michina mhizha yeConcrete"
Countersunk musoro masonry screw anchors zviyero zvakanaka
1, iyo yekucheka eaae yakagadzirwa neyakagadzirwa-strerth zvinyorwa kuti ive nechokwadi chekuti tambo inogona kutemwa zvakanaka mugomba
madziro ezvinyorwa zvibodzwa.
2. Izvo zvimisikidzwa zvinogadzirwa nemidziyo yekupfeka uye inodzoserwa
3. Kuisa uye kusimbisa kunogona kupedzwa mune imwe chete kuenda, kuchengetedza nguva yekuvaka
4. Diki dzinowedzera kushushikana, rinogonesa kuisirwa nemapepa madiki uye spacinq.
5. Zvakazara zvinokatyamadza, zvinonyanya kukodzera kugadzirisa kwenguva pfupi
countersunk concrete anchor boltsinoshanda chiyero
1. Kugadzirira FENCES, PIPME, nezvimwe.
2. Kugadziriswa kwechinguvana panguva yekukurumidzira kwekugadzira kuvaka
3.anchorage yeKutambanudzirwa Kunze Kunze Insulation Panels
Countersunk screw anchoring kuisirwa paramita
| Zvigadzirwa Zvinyorwa | Chigadzirwa chigadzirwa | Drill diameter ita (mm) | Drill yakadzika h (mm) | Kudzika kweHnom Hnom (mm) | Anchor Brickness Thx (mm) | Anchor Aperture D (MM) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
Concrete Screw Fixdex Countserunk Technical Parameter
| Zvigadzirwa Zvinyorwa | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Kudzika kweHnom Hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
| Min substrate gobvu hmin (mm) | 120 | 120 160 160 | 130 160 160 | 160 210 | |
| Tinst max (nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| Vasiri-kupaza kongiri | Kushushikana (kn) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Kuveura simba (kn) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min margin cmin (mm) | 65 | 80 | 100 | 115 | |
| Min Sparing Smin (MM) | 50 | 60 | 75 | 85 | |
| 0.3 mm yakatsemuka kongiri | Kushushikana (kn) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Kuveura simba (kn) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min margin cmin (mm) | 65 | 80 | 100 | 115 | |
| Min Sparing Smin (MM) | 50 | 60 | 75 | 85 | |
