Isikrufu sekonkrithi sentloko ye-countersunk
Intloko ye-Thunderbolt Countersunk
Funda ngokugqithisileyo:Ikhathalogu Izikrufu zekhonkrithi
Inkcazo yemveliso ye-Countersunk Masonry Screw
1. Ukusebenzisa imicu yokusika eludongeni lomngxuma wezinto ezisisiseko, gqibezela i-anchoring.
2. Ubunzima bomgangatho ophezulu, ubuhle kunye ne-eco-friendly
3. Ii-anchors eziphezulu ezihambelana nomgangatho we-JG160-2017 we "Mechanical Anchors for Concrete"
Countersunk Head Masonry Screw Anchors imveliso inzuzo
I-1, i-edae yokusika yenziwe ngezinto eziphezulu zokuqinisekisa ukuba intambo inokusika kakuhle emngxunyeni.
udonga lwezinto ezisisiseko.
2. I-anchors zenziwe ngezinto ezinxilisayo kwaye zisebenziseka kwakhona
3. Ufakelo kunye nokuqiniswa kunokugqitywa ngexesha elinye, ukugcina ixesha lokwakha
4. Uxinzelelo oluncinci lolwandiso, oluvumela ukufakwa kunye nemiphetho encinci kunye ne-spacinq.
5. Ichithwa ngokupheleleyo, ngokukodwa ilungele ukulungiswa kwexeshana
iibholiti zeankile zekhonkrithi eziye zacwiliselwaumda osebenzayo
1. Ukulungisa iingcingo, imibhobho, njl.
2. Ukulungiswa kwexeshana ngexesha lokwakhiwa kolungiso olungxamisekileyo
3.I-Anchorage yeepaneli zokugquma iindonga zangaphandle
Countersunk screw anchor Ufakelo iiparamitha
| Iimpawu zemveliso | Ubude bemveliso | I-Drill Diameter yenza (mm) | Ukubhola ubunzulu h (mm) | Ubunzulu bomngcwabo hnom (mm) | Ukutyeba kweankile thx (mm) | Isimbo se-ankile d (mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
I-Concrete Screw FIXDEX Countersunk Technical parameters
| Iimpawu zemveliso | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Ubunzulu bomngcwabo hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
| Ubunzima besubstrate encinci hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
| Ubuninzi beTinst (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| Ikhonkrithi engaqhekeziyo | Uxinzelelo(KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Amandla okucheba(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Umda omncinci Cmin (mm) | 65 | 80 | 100 | 115 | |
| Isithuba esincinci Smin (mm) | 50 | 60 | 75 | 85 | |
| 0.3 mm ikhonkrithi eqhekekileyo | Uxinzelelo(KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Amandla okucheba(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Umda omncinci Cmin (mm) | 65 | 80 | 100 | 115 | |
| Isithuba esincinci Smin (mm) | 50 | 60 | 75 | 85 | |
