iklasi ngokupheleleyo 12.9 intonga enemisonto

Inkcazelo emfutshane:

Igama:I-Threaded Rod High Tensile yeBanga le-12.9

Ubungakanani:M4-M50,3/16"-2" okanye customizable

Ubude:40mm-6000mm okanye ngokwezifiso

Umgangatho:ISO / DIN / ANSI / ASME / ASTM / BS / AS / JIS

Isixhobo :Q235 / 35K / 45K / 40Cr / B7 / 20MnTiB / A2 / A4 carbon steel & stainless steel

Ibakala:4.8,5.8,6.8,8.8,12.9

Umphezulu :BZP, YZP, zinc plated okanye customizable

Igama lebrand :FIXDEX okanye ucebise abathengi

Umzi-mveliso :Ewe

Iisampulu :Iisampulu ze-High Tensile Threaded Rod zisimahla

MOQ :1000PCS

Ukupakisha :ctn, i-plt okanye inokwenziwa ngokwezifiso

I-imeyile : info@fixdex.com

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

iklasi ngokupheleleyo 12.9 intonga enemisonto

Funda ngokugqithisileyo:Ikhathalogu iintonga ezinemisonto

Umahluko phakathi kwesiqingatha seklasi ye-12.9 intonga enentambo kunye neklasi epheleleyo ye-12.9 intonga

1. Umahluko wesakhiwo phakathi kwesiqingatha sebanga le-12.9 intonga enemisonto kunye nebakala elipheleleyo le-12.9 elinentambo

I-Threaded Rod DIN 975 Steel 12.9 ineentambo kuphela kwinxalenye yobude bebholiti, kwaye enye inxalenye ingumsonto ongenanto. Iibholithi ezinemisonto epheleleyo zineentambo kubude bonke bebholithi. Ukwahluka kwesakhiwo phakathi kwezi ntlobo zimbini zeebholiti kugqiba uluhlu lwesicelo sabo kunye nokuqinisa ukusebenza xa kusetyenziswa.

2. Umahluko kuluhlu lwesicelo seHalf Threaded rod kunye neHigh Tensile Threaded Rod.

Imisonto enesiqingatha isetyenziselwa ukuqinisa oomatshini kunye nezixhobo ezithwala imithwalo yecala, njengokudibanisa izakhiwo zetsimbi, iiplanga ezidibanisayo, i-shafts yokudibanisa, njl., kwaye inzuzo yabo kukuba kulula ukuyichitha kunye nokutshintsha. Iintambo ezigcweleyo zisetyenziselwa ukudibanisa izixhobo ezithwala imithwalo ye-longitudinal, njengokudibanisa iinjini zemoto kunye neziseko, ukudibanisa umzila kaloliwe, njl., kwaye inzuzo yabo kukuba banamandla amakhulu okuqina.

3. Umahluko phakathi kweendlela zokufakela i-half-toothed rods kunye ne-full-toothed rods

Xa ufaka i-half-threaded rod, i-threaded parted parted kufuneka igxininiswe kwinqanaba, kwaye i-bolt kufuneka ijikelezwe ukuze igxininise inxalenye edibeneyo ukuze iqhube inxalenye yomatshini ukuqinisa. Xa ufaka intonga egcweleyo, kuyimfuneko ukunyanzelisa imicu kunye nobude bonke bebholithi kwinxalenye yokuqinisekisa amandla okuqinisa.

Kukho iiyantlukwano ezicacileyo phakathi kweendonga ezinesiqingatha kunye neentambo ezigcweleyo ngokubhekiselele kwisakhiwo, uluhlu lwesicelo kunye nendlela yokufakela. Xa ukhetha uhlobo lwentonga, kuyimfuneko ukukhetha uhlobo olufanelekileyo ngokweemfuno ezithile zokusetyenziswa kunye nokusingqongileyo kokufakela ukuqinisekisa ukusebenza okuzinzile kwamacandelo omatshini.