Indlela yofakelo yee-ankile zekhonkrithi kunye nezilumkiso

indlela yokusebenzisa ibholiti yeankile ye-wedge?

ukufakwa kwee-ankile ze-wedgeInkqubo ingashwankathelwa ngokufutshane njenge: ukubhola, ukucoca, ukubethelwa kwiibholithi ze-ankile, kunye nokusebenzisa i-torque.

Ukufaka i-torque, nganyetrubolt wedge iankileine-torque yokufakela, kwaye idigri yokwandisa i-cone yokwandisa ilawulwa ngubukhulu be-torque.

Le torque kufuneka ilandelwe ngexesha lofakelo. Itorque engonelanga iya kubangela ukwandiswa okunganelanga, okukhokelela kumthamo onganelanga wokuthwala. Okanye i-torque engaphezulu iya kubangela ukuba i-cone yande kakhulu, okuya kubangela ukungonelanga umthamo wokuthwala kunye nokufuduka ngokugqithiseleyo ngexesha lokutsalwa.

1. Ukufakwa kwangaphambili kwesakhiwo sensimbiiiankile zentsimbi: imingxuma yokugcinaiibholiti ze-ankile zesakhiwo sentsimbikumacandelo asemhlabeni okanye aphathekayo, kwaye emva koko u-pre-embed i-anchor structure bolts ngaphakathi. Ubungakanani kunye nobunzulu kufuneka buhlangabezane neemfuno zoyilo, kwaye ubunzulu bokufaka kufuneka buhlangabezane neenkcukacha zokusebenza kweebholiti ze-anchor ukuqinisekisa ukuqina nokuthembeka.

2. Ukufakwa kweebholiti zokwandisa amandla aphezulu: zihombiseUkwandiswa kwesakhiwo sentsimbi ibholithi yeankileemngxunyeni, yifake kwi groove yodonga lwangaphakathi, uze ujikelezise isikrufu emngxunyeni ukwenza intsimbi isakhiwo ibholiti iankile ukwandisa de ibambelele ngokuqinileyo.

3. Ukufakwa kweentsimbi ze-anchor bolts ezingenakwandiswa: Qinisekisa ukuba iibholiti ze-anchor zesakhiwo sensimbi zikwindawo yokuvula i-design evuliwe ngaphambili, kwaye emva koko ulungise amantongomane kunye nama-washers ukulungisa i-bolts yentsimbi ye-anchor bolts kumacandelo ekhonkrithi.

Amanqaku ofakelo lwee-ankile zekhonkrithi

1. Qinisekisa ukuba ukuchaneka kunye nobukhulu bentsimbi ye-anchor bolts ihlangabezana neemfuno zokuyila, kwaye yenza unyango lwangaphezulu ukuze kuqinisekiswe ukuxhathisa ukubola kunye namandla eebhotshi ze-anchor zensimbi.

2. Qinisekisa ukuba ubunzulu kunye nokuqina kweebholiti ze-anchor zensimbi zihlangabezana neemfuno zokuyila ukuqinisekisa ukhuseleko lwesakhiwo.

3. Qinisekisa ukuba ukufakwa kweentsimbi ze-anchor bolts zenziwa ngokuhambelana neemfuno zokuyila ukuqinisekisa ukhuseleko kunye nokuzinza kwesakhiwo sokwakha.

4. Qinisekisa ukuba xa usebenzisa i-steel structure anchor bolts, landela imimiselo yokhuseleko olufanelekileyo kunye nemimiselo yezempilo yomsebenzi ukunciphisa ukuvela kwezifo ezisebenza emsebenzini kunye neengozi zokhuseleko.