I-Wedge Anchor Tensle
IIkhonkrithi yomtshatoItheyibhile yamandla othelekiso lwe-bolt ye-bolts enokwandiswa inokusinceda ukuba sikhethe i-bolts yokwandiswa okufanelekileyo ukuze kuqinisekiswe ukhuseleko kunye nokuthembeka konxibelelwano. Ngokwenene, kufuneka sikhethe imodeli efanelekileyo yokwanda kwe-bolt ngokweemfuno zesakhiwo, kwaye sithelekise ixabiso elifanelekileyo kwitafile enexabiso elilinganayo lokuqinisekisa ukuba amandla e-thensileukwandiswa kweebhlokohlangabezana neemfuno.
Zeziphi izinto eziza kuchaphazela amandla atyunjiweyoWedge Bolt:
1. Nika ingqalelo kwiNkamezelo yokufakelwa kwe-bolt yokwandiswa kunye nobungakanani bomngxunya wokuqinisekisa ukuba ukuxabana phakathi kwe-bolt nodonga lomngxunya lukhulu ngokwaneleyo.
2. Sebenzisa izixhobo ezifanelekileyo kunye neendlela zokuqinisa i-bolts yokwanda ukuze uphephe amandla aphezulu okanye awona amandla aqinileyo.
3. Jonga rhoqo imeko yokuqinisa kunye nokusebenza kwentembeli ye-bolts ekwandiseni, kunye nokubuyisela i-bolt yothintelo olomiselweyo okanye elandayo ngexesha.
Xa usebenzisa i-trubolt ye-anchor, kufuneka sikhethe, sifaka kwaye siyihlole ngokweemfuno ezisemgangathweni ukuqinisekisa uzinzo nokhuseleko lwesakhiwo.
| Ibanga loku-5.8 ledge ancge | ||||||
|---|---|---|---|---|---|---|
| ubungakanani | Ubunzulu obuqhelekileyo | |||||
| M6 | M8 | M10 | M12 | M16 | M20 | |
| Uxinzelelo (kn) | 4.0 | 9.0 | 11.3 | 16.7 | 24.7 | 39.7 |
| Ukucheba amandla (KN) | 3.8 | 5.8 | 8.9 | 12.3 | 21.8 | 37.8 |
| ubungakanani | I-Dept Dept | |||||
| M6 | M8 | M10 | M12 | M16 | M20 | |
| Uxinzelelo (kn) | 5.4 | 12.6 | 16.5 | 19.8 | 30.6 | 41.2 |
| Ukucheba amandla (KN) | 6.84 | 10.44 | 16.02 | 22.14 | 39.24 | I-68.04 |
| Ibanga le-8.8 ledge ancge | ||||||
|---|---|---|---|---|---|---|
| ubungakanani | Ubunzulu obuqhelekileyo | |||||
| M6 | M8 | M10 | M12 | M16 | M20 | |
| Uxinzelelo (kn) | 6.0 | 13.5 | 15.7 | 19.8 | 29.2 | 42.7 |
| Ukucheba amandla (KN) | 5.7 | 8.7 | 13.35 | 18.45 | 32.7 | I-56.7 |
| ubungakanani | I-Dept Dept | |||||
| M6 | M8 | M10 | M12 | M16 | M20 | |
| Uxinzelelo (kn) | 4.6 | 10.5 | 12.7 | 16.5 | 22.9 | 32.5 |
| Ukucheba amandla (KN) | 5.7 | 8.7 | 13.35 | 18.45 | 32.7 | I-56.7 |
| Wedge Anchor | ||||||
|---|---|---|---|---|---|---|
| ubungakanani | Ubunzulu obuqhelekileyo | |||||
| M6 | M8 | M10 | M12 | M16 | M20 | |
| Uxinzelelo (kn) | 7.2 | 16.2 | 19.8 | 22.3 | 32.4 | 44.5 |
| Ukucheba amandla (KN) | 6.85 | 10.44 | 16.02 | 22.14 | 39.24 | I-68.04 |
| ubungakanani | I-Dept Dept | |||||
| M6 | M8 | M10 | M12 | M16 | M20 | |
| Uxinzelelo (kn) | 5.4 | 12.6 | 16.5 | 19.8 | 30.6 | 41.2 |
| Ukucheba amandla (KN) | 6.84 | 10.44 | 16.02 | 22.14 | 39.24 | I-68.04 |
IXESHA LOKUQALA: Jun-18 ukuya kwi-2024