Ipeyintiwe iHex Washer Head SDS
| Iimbonakalo | Iinkcukacha |
| Hex Drive | Ukuqhuba okulungileyo phantsi kwetorque ephezulu yofakelo |
| Gqiba | Ukusebenza kokubola kwe-Anti-corrosion PolysealTM/i-zinc plated |
| EPDM/Rubber/PVC/BondedIwasha | Qinisekisa isitywina esisebenzayo kunye nokumelana nokuguga |
| Ukudibanisa Umbala | Ipeyintwe intloko ngokwemfuno yomxhasi |
| Ubungakanani (intshi) | Dia. x Ubude (mm) | Indawo yokuDla (mm) | Drill Umthamo (mm) |
| #10-16 x 1/2“ | 4.8 x 13 | #2 | 1.0 - 2.0 |
| #10-16 x 5/8“ | 4.8 x 16 | #2 | 1.0 - 2.0 |
| #10-16 x 3/4“ | 4.8 x 19 | #2 | 1.0 - 2.0 |
| #10-16 x 1“ | 4.8 x 25 | #3 | 1.0 - 3.0 |
| #10-16 x 1-1/4“ | 4.8 x 32 | #3 | 1.0 - 3.0 |
| #10-16 x 1-1/2“ | 4.8 x 38 | #3 | 1.0 - 3.0 |
| #10-16 x 2“ | 4.8 x 50 | #3 | 1.0 - 3.0 |
| #12-14 x 3/4“ | 5.5 x 19 | #2 | 2.0 – 4.0 |
| #12-14 x 1“ | 5.5 x 25 | #3 | 2.0 – 4.0 |
| #12-14 x 1-1/4“ | 5.5 x 32 | #3 | 2.0 – 4.0 |
| #12-14 x 1-1/2“ | 5.5 x 38 | #2 | 1.0 - 2.0 |
| #12-14 x 2“ | 5.5 x 50 | #3 | 2.0 – 4.0 |
| #12-14 x 2-1/2“ | 5.5 x 63 | #3 | 2.0 – 4.0 |
| #12-14 x 3“ | 5.5 x 75 | #3 | 2.0 – 4.0 |
| #14-14 x 3/4“ | 6.3 x 19 | #3 | 2.0 – 4.0 |
| #14-14 x 1“ | 6.3 x 25 | #3 | 2.0 – 4.0 |
| #14-14 x 1-1/4“ | 6.3 x 32 | #3 | 2.0 – 4.0 |
| #14-14 x 1-1/2“ | 6.3 x 38 | #3 | 2.0 – 4.0 |
| #14-14 x 2“ | 6.3 x 50 | #3 | 2.0 – 4.0 |
| #14-14 x 2-1/2“ | 6.3 x 63 | #3 | 2.0 – 4.0 |
| #14-14 x 3“ | 6.3 x 75 | #3 | 2.0 – 4.0 |
| #14-14 x 4“ | 6.3 x 100 | #3 | 2.0 – 4.0 |
| #14-14 x 5“ | 6.3 x 125 | #3 | 2.0 – 4.0 |
Phawula:
Zonke iimveliso zethu ziza ngobukhulu obahlukeneyo, isitayile kwaye zinokulungiswa ukuze zilingane neemfuno zakho.
Kwaye malunga nobukhulu obungachazwanga ngasentla, nceda uqhagamshelane nathi ngolwazi oluthe vetshe.
Kubaukukhanya/umsebenzi ophakathi ngenjongo
Ukulungisa ridekhi ukuya kwifreyim yentsimbi
Ukulungisa aizinto ezizezinye zentsimbi
Iphepha ledatha yobugcisa
Bhala umyalezo wakho apha kwaye uwuthumele kuthi
