I-FIXDEX-Goodfix Concrete Screw-Anchors yenziwe yakhanyiswa
Isikulufa sikakhonkolo-Amahange abenziwe amagalani
Funda kabanzi:Ikhathalogi Izikulufu zikakhonkolo
Izikulufo zikakhonkolo incazelo yomkhiqizo
1. Usebenzisa imicu ukusika odongeni lwembobo yezinto eziyisisekelo, qedela i-anchoring.
2. Ubulukhuni obuphezulu bobuso, bubuhle futhi bunobungani bemvelo
3. Amahange asebenza kahle kakhulu athobelana nezinga le-JG160-2017 elithi “Mechanical Anchors for Concrete”
tapcon ukhonkolo amahange izinzuzo umkhiqizo
I-1, i-edae yokusika yenziwe ngezinto ezisezingeni eliphezulu ukuze kuqinisekiswe ukuthi intambo ingasika kahle emgodini.
udonga lwezinto eziyisisekelo.
2. Amahange enziwe ngezinto ezingagugi futhi asebenziseka kabusha
3. Ukufakwa nokuqinisa kungaqedwa ngesikhathi esisodwa, konga isikhathi sokwakha
4. Ukucindezeleka okuncane kokwandisa, okuvumela ukufakwa okunemiphetho emincane kanye ne-spacinq.
5. Iyalahleka ngokuphelele, ilungele ukulungiswa kwesikhashana
i-tapcon screws ububanzi obusebenzayo
1. Ukulungisa uthango, amapayipi, njll.
2. Ukulungiswa kwesikhashana ngesikhathi sokwakhiwa kokulungisa izimo eziphuthumayo
3.Ukubambelela kwamaphaneli odonga angaphandle
Kufakwe amagalaniIsikulufa sikakhonkoloAmapharamitha wokufaka ama-Bolts
Imininingwane yomkhiqizo | Ubude bomkhiqizo | I-Drill Diameter yenza (mm) | Geza ukujula h (mm) | Ukujula kokungcwaba hnom (mm) | Ukuqina Kwesikhonkwane thx (mm) | Isimboli Sehange d (mm) |
---|---|---|---|---|---|---|
M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
M10 | 70 | 10 | 80 | 65 | 5 | 14 |
M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
M14 | 110 | 14 | 120 | 100 | 10 | 18 |
M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
I-galvanized hex head screw bolt Imingcele yezobuchwepheshe
Imininingwane yomkhiqizo | M8 | M10 | M12 | M14 | |
---|---|---|---|---|---|
Ukujula kokungcwaba hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
Ubukhulu be-substrate encane i-hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
I-Tinst max (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
Ukhonkolo ongaqhekeki | Ukushuba (KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
Amandla okugunda(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
Imajini encane Cmin (mm) | 65 | 80 | 100 | 115 | |
Isikhala esincane Smin (mm) | 50 | 60 | 75 | 85 | |
0.3 mm ukhonkolo oqhekekile | Ukushuba (KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
Amandla okugunda(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
Imajini encane Cmin (mm) | 65 | 80 | 100 | 115 | |
Isikhala esincane Smin (mm) | 50 | 60 | 75 | 85 |