isikulufu sikakhonkolo se-flange
isikulufu sikakhonkolo se-flange
Funda kabanzi:Ikhathalogi Izikulufu zikakhonkolo
Incazelo yomkhiqizo wezinsimbi zikakhonkolo
1. Ukusebenzisa imicu ukusika odongeni lwembobo yesisekelo, qedela i-anchoring.
2. Ubulukhuni obuphezulu bobuso, bubuhle futhi bunobungani bemvelo
3. Amahange asebenza kahle kakhulu athobelana nezinga le-JG160-2017 elithi “Mechanical Anchors for Concrete”
Ukhonkolo amahange izinzuzo umkhiqizo
I-1, i-edae yokusika yenziwe ngezinto ezisezingeni eliphezulu ukuze kuqinisekiswe ukuthi intambo ingasika kahle emgodini.
udonga lwezinto eziyisisekelo.
2. Amahange enziwe ngezinto ezingagugi futhi asebenziseka kabusha
3. Ukufakwa nokuqinisa kungaqedwa ngesikhathi esisodwa, konga isikhathi sokwakha
4. Ukucindezeleka okuncane kokwandisa, okuvumela ukufakwa okunemiphetho emincane kanye ne-spacinq.
5. Iyalahleka ngokuphelele, ilungele ukulungiswa kwesikhashana
Izikulufo zehange zikakhonkolo ububanzi obusebenzayo
1. Ukulungisa uthango, amapayipi, njll.
2. Ukulungiswa kwesikhashana ngesikhathi sokwakhiwa kokulungisa izimo eziphuthumayo
3.Ukubambelela kwamaphaneli odonga angaphandle
Isikulufa sikakhonkolos Imingcele yokufaka i-Hex Flange Head
| Imininingwane yomkhiqizo | Ubude bomkhiqizo | I-Drill Diameter yenza (mm) | Geza ukujula h (mm) | Ukujula kokungcwaba hnom (mm) | Ubukhulu Behange thx (mm) | Isimboli Sehange d (mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
I-galvanized hex head screw bolt Imingcele yezobuchwepheshe
| Imininingwane yomkhiqizo | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Ukujula kokungcwaba hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
| Ubukhulu be-substrate encane i-hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
| I-Tinst max (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| Ukhonkolo ongaqhekeki | Ukushuba (KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Amandla okugunda(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Imajini encane Cmin (mm) | 65 | 80 | 100 | 115 | |
| Isikhala esincane Smin (mm) | 50 | 60 | 75 | 85 | |
| 0.3 mm ukhonkolo oqhekekile | Ukushuba (KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Amandla okugunda(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Imajini encane Cmin (mm) | 65 | 80 | 100 | 115 | |
| Isikhala esincane Smin (mm) | 50 | 60 | 75 | 85 | |
