Wedge ama-anchor tensile amandla
Le khasiIhange le-Concrete WedgeItafula le-Tensile Percen Marmission lama-bolts wokunwebeka lingasisiza ukuthi sikhethe ama-bolts afanelekile ukuqinisekisa ukuphepha nokwethenjwa kokuxhumeka. Ekusetshenzisweni kwangempela, kufanele sikhethe imodeli ye-BOLT efanelekile ngokuya ngezidingo zesakhiwo, bese uqhathanisa inani elijwayelekile etafuleni nenani elinganisiwe ukuqinisekisa ukuthi amandla ashubile aama-bolts wokunwebekaihlangabezana nezidingo.
Yiziphi izinto ezizothinta amandla okudonsa kwewedge bolt:
1. Nakisisa ukuqondiswa kokufakwa kwe-BOLT yokwanda nosayizi womgodi ukuze uqinisekise ukuthi ukungqubuzana okuphakathi kwe-bolt nodonga lomgodi kukhulu ngokwanele.
2. Sebenzisa amathuluzi afanele nezindlela zokuqinisa ama-bolts wokunwebeka ukuze uvikele amandla ngokweqile noma anele okuqinisa.
3. Hlola njalo isimo esiqinisekisayo nokusebenza okuthe xaxa kwama-bolts wokunwebeka, bese ubeka esikhundleni sokululwa kokonakala noma okudala ukunwetshwa ngesikhathi.
Lapho sisebenzisa i-trubolt wedge anchor, kufanele sikhethe, sifake futhi sizihlole ngokuya ngezidingo ezijwayelekile ukuqinisekisa ukuqina nokuphepha kwesakhiwo.
| Ibanga 5.8 Wedge Anchor | ||||||
|---|---|---|---|---|---|---|
| ubungako | ukujula okujwayelekile | |||||
| M6 | M8 | M10 | M12 | M16 | I-M20 | |
| Ukungezwani (kn) | I-4 | 9.0 | 11.3 | 16.7 | 24.7 | 39.7 |
| Amandla okugunda (kn) | 3.8 | I-5.8 | 8.9 | 12.3 | 21.8 | 37.8 |
| ubungako | i-dept engajulile | |||||
| M6 | M8 | M10 | M12 | M16 | I-M20 | |
| Ukungezwani (kn) | 5.4 | 12.6 | 16.5 | 19.8 | 30.6 | 41.2 |
| Amandla okugunda (kn) | 6.84 | 10.44 | 16.02 | 22.14 | 39.24 | I-68.04 |
| Ibanga 8.8 Wedge Anchor | ||||||
|---|---|---|---|---|---|---|
| ubungako | ukujula okujwayelekile | |||||
| M6 | M8 | M10 | M12 | M16 | I-M20 | |
| Ukungezwani (kn) | I- | 13.5 | 15.7 | 19.8 | 29.2 | 42.7 |
| Amandla okugunda (kn) | I-5.7 | 8.7 | 13.35 | 18.45 | 32.7 | 56.7 |
| ubungako | i-dept engajulile | |||||
| M6 | M8 | M10 | M12 | M16 | I-M20 | |
| Ukungezwani (kn) | 4.6 | 10.5 | 12.7 | 16.5 | 22.9 | 32.5 |
| Amandla okugunda (kn) | I-5.7 | 8.7 | 13.35 | 18.45 | 32.7 | 56.7 |
| wedge anchor | ||||||
|---|---|---|---|---|---|---|
| ubungako | ukujula okujwayelekile | |||||
| M6 | M8 | M10 | M12 | M16 | I-M20 | |
| Ukungezwani (kn) | 7.2 | 16.2 | 19.8 | 22.3 | 32.4 | 44.5 |
| Amandla okugunda (kn) | 6.85 | 10.44 | 16.02 | 22.14 | 39.24 | I-68.04 |
| ubungako | i-dept engajulile | |||||
| M6 | M8 | M10 | M12 | M16 | I-M20 | |
| Ukungezwani (kn) | 5.4 | 12.6 | 16.5 | 19.8 | 30.6 | 41.2 |
| Amandla okugunda (kn) | 6.84 | 10.44 | 16.02 | 22.14 | 39.24 | I-68.04 |
Isikhathi Sokuthumela: Jun-18-2024