insimbi engagqwali isikulufa sikakhonkolo
insimbi engagqwali isikulufa sikakhonkolo
Funda kabanzi:Ikhathalogi Izikulufu zikakhonkolo
insimbi engagqwali isikulufa amahangeincazelo yomkhiqizo
1. Ukusebenzisa imicu ukusika odongeni lwembobo yesisekelo, qedela i-anchoring.
2. Ubulukhuni obuphezulu bobuso, bubuhle futhi bunobungani bemvelo
3. Amahange asebenza kahle kakhulu athobelana nezinga le-JG160-2017 elithi “Mechanical Anchors for Concrete”
insimbi engagqwali isikulufa boltsizinzuzo
I-1, i-edae yokusika yenziwe ngezinto ezisezingeni eliphezulu ukuze kuqinisekiswe ukuthi intambo ingasika kahle emgodini.
udonga lwezinto eziyisisekelo.
2. Amahange enziwe ngezinto ezingagugi futhi asebenziseka kabusha
3. Ukufakwa nokuqinisa kungaqedwa ngesikhathi esisodwa, konga isikhathi sokwakha
4. Ukucindezeleka okuncane kokwandisa, okuvumela ukufakwa okunemiphetho emincane kanye ne-spacinq.
5. Iyalahleka ngokuphelele, ilungele ukulungiswa kwesikhashana
316 isikulufu sikakhonkolo sensimbi engagqwali esebenzayo
1. Ukulungisa uthango, amapayipi, njll.
2. Ukulungiswa kwesikhashana ngesikhathi sokwakhiwa kokulungisa izimo eziphuthumayo
3.Ukubambelela kwamaphaneli odonga angaphandle
insimbi engagqwali ukhonkolo amahange Imingcele Ukufakwa
| Imininingwane yomkhiqizo | Ubude bomkhiqizo | I-Drill Diameter yenza (mm) | Geza ukujula h (mm) | Ukujula kokungcwaba hnom (mm) | Ubukhulu Behange thx (mm) | Isimboli Sehange d (mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
insimbi engagqwali tapcon ngezikulufo Imingcele yobuchwepheshe
| Imininingwane yomkhiqizo | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Ukujula kokungcwaba hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
| Ubukhulu be-substrate encane i-hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
| I-Tinst max (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| Ukhonkolo ongaqhekeki | Ukushuba (KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Amandla okugunda(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Imajini encane Cmin (mm) | 65 | 80 | 100 | 115 | |
| Isikhala esincane Smin (mm) | 50 | 60 | 75 | 85 | |
| 0.3 mm ukhonkolo oqhekekile | Ukushuba (KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Amandla okugunda(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Imajini encane Cmin (mm) | 65 | 80 | 100 | 115 | |
| Isikhala esincane Smin (mm) | 50 | 60 | 75 | 85 | |
